Description

These additives are used to maintain fluidity of lubricants at lower temperatures and thus help expand their operating temperature range by interfering with the higher hydrocarbon crystallization process. They are recommended for use in a wide variety of lubricants including engine, ‘hydraulic and gear oils.

Benefits

• Used as fluidity improver in lubricant to meet stringent low temperature viscosity requirements.
• Can be used on varied variety of base oils.
• Low dosage requirements

Recommended Products

ACON PPD LX Series (Polymethacrylate)

Description

• PMA based viscosity index improver
• Dispersant type PMA based viscosity index improver

These are PMA based polymeric molecules that are sensitive to temp. At low temperatures, the molecule chain contracts and does not impact the fluid viscosity. At high temperatures, the chain relaxes and an increase in viscosity occurs.

Benefits

• Helps maintain viscosity profile of hydraulic oils over a range of temperature
• The right shear stability to maximize performance and minimize cost in multigrade hydraulic oils
• Facilitates the flexibility to use Group I base oils in wide applications.
• Good handling characteristics.

Recommended Products

ACON VII Series (Polymethacrylate)

ACON PMA D-70 (Polymethacrylate)

ACON VII 600 D

Description

These additives under extreme pressure and temperature reacts with metal surfaces and form a protective coating which can withstand extreme heat and pressure caused by continuous contact of metal surfaces. Antiwear agents perform in a similar manner but tend to operate under lower loads & pressure.

Benefits

• Antiwear additives are active at lower pressure & temperatures.
• EP additive shows minimal amount of thermal degradation at temperatures approaching 235 OC.

Recommended Products

ACON TLP
ACON TPP (Phosphite Ester)

Description

These additives are compatible with a wide range of base oils used for machining operations. Depending upon the desired quality/ specification of the cutting oil & its emulsion, custom designing of suitable emulsifier package which can be done to optimize emulsion stability.

Benefits

• Emulsifier packages are available for a range of base oils that include HVI, LVI, SN 100, SN 70, SN 150, Transformer Oil, Diesel & other base oils of Naphthenic/Paraffinic origin
• Excellent hard water emulsion stability
• Excellent anti-corrosion properties & ant-bacterial properties
• Excellent lubrication properties
• Low foaming

Recommended Products

ACON STOCK 86 (Sodium Petroleum Sulphonate based)

EMULSIFIER FOR CONING OIL

Description

These are specially formulated oil soluble emulsifiers for making soluble oils for applications in fibre, textile machines and machine industries. It is compatible with all types of paraffinic base oils having viscosity of SN 70 to SN 150.

Benefits

• Oil soluble
• Non – staining, good emulsion stability and excellent antistatic properties
• Used for softening and wetting the yarns during woollen/rayon cording and coning operations

Recommended Products

ACON COE 70 (Non-ionic formulations)

EMULSIFIERS FOR AGRICULTURAL SPRAY OIL

Description

Benefits

• Emulsifier packages are available for a range of base oils that include HVI, LVI, SN 100, SN 70, SN 150, Transformer Oil, Diesel & other base oils of Naphthenic/Paraffinic origin
• Excellent hard water emulsion stability
• Excellent anti-corrosion properties & ant-bacterial properties
• Excellent lubrication properties
• Low foaming

Recommended Products

ANTIOXIDANTS/ STABILIZERS

Description

These additives terminate free radical chain reactions and prevent oxidative degradation without affecting other properties of the fuel.

Benefits

• Increases the fuel stability for a longer period of time
• Restricts corrosion of engine and fuel injection system
• Increases the productivity and life expectancy of the Engine
• Prevents the formation of gums which interfere in the combustion process

Recommended Products

ACON AO Series (Phenylene Diamines/ Phosphite Esters /Phenolic)

POUR POINT DEPRESSANTS / CFPP ADDITIVES FOR DIESEL

Description

These additives are polymers designed to interfere with the higher hydrocarbon crystallization process, thus modifying their crystal structure. The change in the crystal shape prevents fuel filter plugging and diminishes their ability to aggregates/ intergrow and interlock, resulting in lowering the pour point and CFPP of the diesel.

Benefits

• Increases flow properties of fuel oil at low temperatures.
• Reduces Cold Filter Plugging Point (CFPP)
• Completely organic and Ash free.
• Does not affect the Cetane number.

Recommended Products

ACON PPD FX Series (Malanstyrene Esters/ Ethylene vinyl acetates)

POUR POINT DEPRESSANTS FOR HEAVY FUELS/VGO/ BUNKER FUELS

Description

These additives are polymers designed to interfere in the higher hydrocarbon crystallization process, thus modifying their crystal structure. The change in the crystal shape diminishes their ability to aggregate/ inter grow and inter lock, resulting in lowering the pour point of the heavy fuel.

Benefits

• Improves flow properties of heavy fuel oil at low temperatures.
• Eliminates shutdown or inability to start diesel engines or furnaces.
• Decreases the fuel loading & unloading time.

Recommended Products

ACON PPD FFO series (Acrylates / Male

CORROSION INHIBITORS

Description

These additives get adsorbed on the metallic surface, protecting the metal surface by forming a film, giving the surface a great level of protection.

Benefits

• Increases the equipment life span
• Cost saving due to deferred replacement.
• Reduces reaction of ions to the metallic surface.
• Increases the ionic resistance of metallic surface.

Recommended Products

ACON CI Series (Imidazoline Based/ (Proprietary Formulations)

CORROSION INHIBITOR FOR PRODUCT PIPELINES

Description

This is a film forming type, fatty acid derived Corrosion Inhibitor for liquid hydrocarbon pipelines (Naphtha, SKO, Middle Distillates, etc.). It is completely soluble with finished fuels and exhibits no emulsifying effects. It is EPA approved & conforms to NACE standards

Benefits

• Shear stable & effective during flow
• Exhibits high efficiency at low treat rates
• Increases the metallic part's life span
• Organic, free from N, S and P
• Easy applicability

Recommended Products

ACON CI Series (Proprietary Formulation)

CORROSION INHIBITOR FOR ETHANOL BLENDED GASOLINE

Description

This product prevents the corrosion of metal components due to the hygroscopic nature of Ethanol. When added to E3, E5, E10, it prevents rust formation in storage facilities, pipelines, pumps, vehicle and Engines.

Benefits

• Fully compatible with gasoline and its additives
• EPA registered
• Conforms to NACE standards
• Low treat rates
• Easy applicability
• Organic, free from N, S and P

Recommended Products

ACON CI Series (Proprietary Formulation)

CORROSION INHIBITOR & LUBRICITY ENHANCER ADDITIVES (FOR FINISHED FUELS)

Description

These additives are effective in providing corrosion protection to pipelines, tanks and equipments to transport and store gasoline, diesel, ethanol, heating oils and Aviation fuels. These, also help in providing lubricity enhancement to all finished fuels including jet fuels.

Benefits

• Completely oil soluble
• Compatible with other fuel additives
• Minimizes corrosion and formation of corrosion products
• Excellent lubricity enhancement characteristics

Recommended Products

ACON LCI 200 (Proprietary Formulations)

CETANE IMPROVERS

Description

These additives are used to substantially increase the diesel Cetane number. These additives improve the ignition performance and also reduce diesel vehicle emission.

Benefits

• Increases the proportion of the crude barrel available for use in the diesel pool
• Improves the ignition quality to give reduced noise, reduced emissions, better cold start ability and improved fuel economy
• Increases engine efficiency
• Reduces the time between the ignition and fuel burning

Recommended Products

ACON 2 EHN (2-Ethylhexyl Nitrate)

LUBRICITY IMPROVERS FOR DIESEL

Description

These additives impart lubricity to the diesel which gets lost due to removal of natural occurring lubricity components while removing sulfur content from the crude.

Benefits

• Proven HFRR performance in a variety of fuels
• Low sulphur content minimizes impact on ULSD
• Excellent low temperature stability and handling
• Does not harm other properties of Fuel

Recommended Products

ACON LI Series (Acid type/ Ester type)

OCTANE BOOSTERS

Description

These additives improve the Octane rating/ octane number of the Gasoline. The higher the octane number, the more compression the fuel can withstand before detonating. Fuels with a higher octane rating are used in high-compression engines that generally have higher performance.

Benefits

• Help prevent engine detonation and the damage caused by it
• Free of poisonous components and heavy metal, reducing harmful gas exhaust, effectively
• Improves gasoline quality
• Low cost addition

Recommended Products

ACON OB Series (Non-metallic / Metallic)

FUEL OIL EMULSIFIERS

Description

These additives are used to prepare a emulsion fuel compound , a mixture of water emulsified in heavy oil. It accounts to the need of fuel oil to flow liberally at lower temperatures. This lower viscosity aspect of fuel oil emulsion provides added savings in energy in pumping the fuel oil and heating it to preserve the emulsion in a proper pumping state.

Benefits

• Resulting operational benefits with ease of pumping emulsion even at low temperature
• Improved combustion properties
• Increases Primary and Secondary Atomization
• More Complete and Even Burning, reduced soot.

Recommended Products

ACON FOE (Proprietary Surfactant)

MULTIFUNCTIONAL ADDITIVES FOR GASOLINE

Description

This is a complete performance package for gasoline, used to meet the challenges of modern Direct Injection Gasoline (DIG) technology, whilst continuing to deliver excellent performance in traditional Port Fuel Injection (PFI) engine platform.

Benefits

• Enhanced stability and performance
• Enhanced fuel economy
• Enhanced engine life
• Good demulsification
• Corrosion protection

Recommended Products

ACON MFA (Proprietary Blend)

DEWAXING AIDS

Description

This product is used at very low treat rates, and interacts with long chain paraffin’s resulting in improved filtration speed & higher oil yield. Thus, it improves the filtration characteristics of the base oil system and provides superior low temperature performance.

Benefits

• Improves yield of dewaxed oil
• Effective at low concentration
• Increases dewaxing unit’s throughput
• Reduced solvent/oil ratios and wash solvent volumes
• Reduces risk of slack-wax formation on filters

Recommended Products

ACON DEWAX 440 (Polymethacrylate)

SLUDGE BREAKERS

Description

These additives rapidly dissolve and fluidize sludge, wax, gum and tar formations while effectively separating water from oil/water emulsions.

Benefits

• Frees the entrapped oil inside sludge
• Eliminates plugging of suction lines
• Cleans the bottom of the tank and help restore the tank capacity

Recommended Products

ACON SB Series (Proprietary Formulations)